Equipment performance characteristics
1. This device is controlled by a PC computer and has a template program memory function. When it is produced again, only the template needs to be called from the system.
2. This device is suitable for structurally symmetrical flat plates (with a thickness of over 1.5mm), with an edge wrapping accuracy of 0.1mm and an edge wrapping efficiency of 1200-1600 pieces per hour (depending on the size and thickness of the backlight plate), with a daily output of 8K to 15K.
Main technical indicators:
1. Edge wrapping accuracy: 0.1mm in the upper and lower directions of the light guide plate, 0.3mm at both ends
2. Edge wrapping speed: 1000-1500 pieces/hour (depending on the size of the backlight board). Edge wrapping width: 1.5-5mm
3. Edge feeding method: The coil is automatically fed
4. Loading method of light guide plate: stacking or single piece
5. Adapt to the size of the backlight board (length * width): 25mm * 35mm~120mm * 120mm
6. Machine dimensions: (length * width * height): 800mm * 750mm * 1500mm (including display)
Working environment conditions:
1. Power supply: 220AVC earth 5%/50Hz
2. Compressed air:~0.5Mpa
3. Power: 300W Gas consumption: 10L/min
